Robot Control Panel
The Robot Control Panel is used to set the connection between Fuzzy Studio and RTOS.
Click the Robot Connection button to Enable the connection on the Fuzzy Studio side (and the RTOS Launcher for the RTOS side).
If you are connected to a Fuzzy RTOS IPC you can switch between the Simulation and Real Robot mode.
The Ready to run status Icon shows wether the system is ready to run or not.
For the Simulation Mode it is entirely dependant on wether the RTOS Drivers have been correctly loaded or not. For the Real Robot Mode it depends on the RTOS Drivers but also on the status of the robot, if the emergency stop is pressed or an error is present on the robot controller side, the indicator will be red.
The Deadman Icon shows wether the Deadman touch (CTRL) is pressed on the keyboard or not.
When the deadman is pressed it is also possible to click the Jogging button, and that will activate the Robot Jogging mode.